Transair Air System

Series VME

  • Mini valves with 3/2 NO NC poppet
  • Installation in any position
  • Push-in fittings for pipe Ø 4 mm and M5 on the valve body
  • Low actuation force
  • Rapid, accurate signal
  • Mechanical actuation

    The 2 places adapter allows manual actuation of 1 or 2 VME valves with manual Ø 22 panel actuators.
    Thus it is possible to obtain 3/2, 5/2, 5/3 open centre and 5/3 pressure centre pneumatic functions.
    On request, it is possible to place a NC-NO electric switch next to a VME valve for mixed solenoid/pneumatic signals.

  • Contact us

    Technical information

    • VALVE FITTING PORT - Push In fitting for pipe diam. 4 and M5 (axial or side)

    • FLUID - filtered air without lubrication; lubrication, if used, must be continuous

    • VERSIONS & OPERATIONS - Mechanical (with plunger;plunger for wall mounting;roller lever;unidirectional roller lever) & Manual (depending on the type of actuation panel selected)

    • OPERATING PRESSURE - 0.5-10 bar

    • OPERATING TEMPERATURE RANGE - 10° ÷ + 60°C

    • NOMINAL DIAMETER - 2.5mm

    • CONDUCTANCE C - 16.5 NI/min - bar

    • CRITICAL RATION B - 0.03 bar/bar

    • FLOW RATE @ 6 bar P 0.5 BAR - 35 NI/min

    • FLOW RATE @ 6 BAR P 1.0 BAR - 60 NI/min

    • ACTUATION FORCE (PLUNGER @ 6 BAR) - 8N

    • RECOMMENDED LUBRICANT - ISO and UNI FD 22